110V Automatic Electronic 2 Ton Rosin Press Dual Heating Plates FREE US SHIP

Description

This machine is not suitable for minors to use or food processing.
20,000 PSI ALL ELECTRIC ROSIN PRESS
Incredibly Robust Hydraulic Cylinder
6 x 8 Heating Plates
Separate Digital Temperature Controllers For Top & Bottom Plates
Adjustable Heat Temp: Room Temperature to 500 F
Set temp between 165-330 F so mind your hands.
Set Pressure for consistency, no need for separate air compressor with this all electric hydraulic press
Adjustable Pressing Time.
• General:
It will help you to leave the beautiful and clear picture on cap. So do not hesitate. Cap press machine will transfer the picture printed out on cap easier and faster. The picture is not only clear and vivid, but durable.
Components and functions:
1----start button
2----digital controller
3----heating plates
4-----emergency stop button
Function:
1.Set temperature&Time
2. The temp for Heating plate(3) will start to rise up,when it reaching temp you set,place the material on the working table.
1.Press Start button (4) the heating plate(3) will close.
a)The heating plate(3) will lift up automatic when reaching time you set,then t ake out the material
b)Emergency-stop button(5):when you met any emergency press this button,machine will turn off power
Note:
1.Because the materials and thickness of these materials are different,so the temp and time also required different.
2. Pls try a small sample to get the right temp and time needed before large quantities printing.
3.Clothing require temp about 180℃,Fabric clothing use with sublimation paper:30-50 sec,100%
cotton clothing use with transfer paper:15-20sec.
Problem
Cause
Handling methods
1
Picture burning
Too much time or temp
Adjust time or temp.
2
Fails to heat up,but display well
Heating plate or Relay broken
Check the heating plate or Relay
3
Lack of color, faded image.
Insufficient temperature
and/or press time.
Adjust the temperature
and/or increase the heating time.
4
Darkened, deep color; blurred image.
Pressed for too long,temperature too high
Adjust the temperature and
heating time.
5
No action after turn on power
Plug whether touch well
Fuse whether burn
Check the plug and fuse
6
The real temp pass over setting temp
Relay broken
Replace the relay